Manifold Equilibration Assembly
Equilibrator manifold block is powered by manual pump. When the auto system fails, we can equilibrate the barrel manually with the help of two shuttle valve at the top of manifold block. This assembly consists of Check valves and needle valves for precise operation. This assembly is used in K9 Vajra tanks.
Specifications:
- Maximum operating pressure: 387 ± 7 Kg/cm2
- Oil used: MIL-H-6083
- Relief Valve Opening Pressure: 316.4 ± 7 Kg/cm2
- Oil Leakage: Less than 1 drop for 3 minutes at 175 Kg/cm2
Turret Traverse Electro Magnet:
Turret Traverse Electro Magnet is used in T72 Ajeya Tanks. This is an electromagnet assembly used in Turret Traverse mechanism of the tanks. This assembly is used to disengage the friction dics when the electromagent is energized.
Specifications:
- Rated Voltage: 26 V
- Full stroke: 2 ± 0.1 mm
- Starting coil resistance: 0.385 ± 0.05 Ohms
- Holding coil resistance: 17.5 ± 0.1 Ohms
- Maximum current for starting coil: 80 A at 22 V DC
- Maximum current for holding coil: 1.3 A at 22 V DC
GUN TRAVEL LOCK ACTUATOR
_760x350 px.png)
_400x250.png)
Gun Travel Lock Actuator is an Electro mechanical actuator, which is used for locking the gun, when it is not in use.
Configuration Data:
Mechanical Characteristics:
- Dimension (W×L×H): 261×97×179(mm)
Electrical Characteristics:
- Rated Voltage: 24±0.5 VDC
- Max. Load Current: 15.0 A
- No Load Current: 2.0 A max
- Insulation Resistance: > 50 mΩ
- USED IN: K9 VAJRA
- PURPOSE: Inter lock the Firing barrel of the tank when it is in running condition and also when it is not in use.
- MAIN OBJECTIVE: Protect the Precision firing sensors when the tank is running at Max speed of 67km/hr. (Subject to all Terrain)
- SPL. REQUIREMENT:IPC-A-610 & MIL-STD-810
Hand Pump Assembly Equilibrator:
Hand Pump assembly Equilibrator is used in K9 Vajra Tanks. It is used to adjust the equilibrium pressure by pumping hydraulic oil from the reservoir manually. After every maintenance equilibrium circuit, the equilibration pressure must be adjusted. This pump is a hand operated pump. It uses the reciprocating motion of the piston inside the block to pressurize the hydraulic oil. It retains its original position due to spring action inside the block.
Specifications:
- Oil used: MIL-H-6083
- Working Pressure: 180 Kg/cm2
- Rated Pressure: 0 ~ 350 Kg /cm²
- Oil Cleanliness: NAS-5
Tachometer Sensor Assembly:
Tachometer Sensor assembly gives feedback of the tank’s turret elevation positions electrically.
- This assembly is used in K9 Vajra Tanks.
- One end of the assembly is fixed and the other end is mounted on the elevation drive assembly.
- We have Supplied 72 numbers of Sensor assemblies to Ministry of Defence via L&T Defence.
